Scroll Saw Vs Table Saw – Difference between both saws

Confused about the scroll saw and the table saw? Have reached a never-ending confusion about Scroll Saw vs Table Saw and which one to opt for? If that is the case, lucky for you we have made this article solely to clarify the difference between scroll saw and table saw.

Nonetheless, before jumping to the topic let’s just take a quick detour about what is seen? A saw is a mechanical tool that incorporates a tough blade, wire, or in some cases a chain with a hard toothed edge. 

The tool is used to cut through the materials like wood, metal, or in some areas stone too. To cut through the material, the toothed edge is placed against the material and is allowed to move forcefully forth and then less forcefully in a backward direction. 

That being said, let us resume our current topic and understand what makes Scroll saw and table saw different from each other. 

About Scroll Saw:

A scroll saw is a type of saw that is manufactured with a flat work table and possesses a column coming straight up from the back structure. There is also a small blade that runs in a vertical direction from the end of the arm throughout the table right to the bottom of the saw. 

To understand the mechanism of the Scroll Saw, one must understand the components and how these features work?

1. The Throat:

The throat size is one of the most important parts of the selection process of the Scroll Saw, as such, it denotes the distance between the blade with the vertical column that is attached to the overhead arm. One must find, why the distance of the blade and vertical column is so important. 

For instance, let’s take a 12-inch throat scroll saw. If the size of the throat is 12 inch then that particular scroll saw is capable of cutting a material with a width of about 24 inches by rotating it upside down. 

For an ideal finesse, a 12-inch throat must be used with the 20 inch or 22-inch material. Usually, most of the scroll saws present in the market range between 12 inches to 30 inches throat. 

2. Length of the column:

The cut length of the material is also a crucial aspect, as such the cutting surface of the blade is somewhat limited. In simpler words, if the user feeds a longer piece of wood then it will eventually hit the column. Therefore, cutting long pieces of wood might be a tedious job on the scroll saw.

3. The blades:

The size of the scroll saw blades is about 6 inches long, making it an ideal tool to cut through the 2 inch thicker wood. There are many blades available that can be fitted on the scroll saw, making it a perfect tool for the cutting job. 

If the tension in the blade is right, thus to get that one can use a simple tensioning knob. The blade of the scroll saw plays an integral part to stand out from the other. The cuts made with excellent delicacy, the ability to perform efficient inside cuts mainly make them stand out from the rest. 

Uses of the Scroll Saw:

  • Making of jigsaw puzzles
  • Wooden letters, numbers, and names making
  • Detailed wooden plaques
  • Curved edges just like states
  • Animals and silhouettes making.

About Table Saw:

A table saw that is also known as a saw bench or bench saw in some parts of England is an excellent woodworking tool. The table saw owns a circular saw blade that is mounted to the Arbor and is driven with the help of the electric motor that is connected with the belt or the gears. 

The blade is allowed to protrude from the top of the table to attain support to the materials like wood while cutting. That being said, let us discuss some of the key features of the Table saw. 

1. Depth of the blade:

To cut material, the depth of the cut usually varies due to the movement of the blade in an upward or downward direction. If the height of the blade increases while protruding, the cut would be deeper in the material. 

In earlier days, the blade and the arbor were fixed and the table was supposed to move in an upward or downward direction. 

2. Angle of the blade:

The angle of the blade teeth is also an important point while choosing the saw, as such, with the help of the angled blade the process like chip ejection, reduced power consumption, and heat generation can be achieved. 

Due to this, the peak pushing force is reduced which results in improved control and makes the path of the blade force in a downward direction rather than in a horizontal direction.

Uses of the Table Saw:

  • Ripping
  • Cross cutting
  • Bevel cuts
  • Cutting rabbets and grooves

Conclusion:

Mentioned above are the basic difference between scroll saw, and table saw. With the above information, you can easily decide what you must buy, and what is highly beneficial to you. Here you have all the information that should be mentioned about the difference. 

The difference between scroll saw, and table saw is not huge, but it makes your decision-making process much simpler. Want to know more about these saws? Then, stay tuned with us as we will be right back with more amazing information on the same.

We will be happy to hear your thoughts

Leave a reply

Table Saw Reviews